PLA
S$0.02 / g
Good for
Display models, figurines, prototypes and gifts. The widest choice of colours.
Not ideal for
Hot cars or long hours in direct sun. It softens at around 55 °C.
Your part gets printed the same way: one layer at a time, on a Bambu Lab P1S.
3D printing in Singapore
PrintLarh is a small home workshop with one Bambu Lab P1S. Send us your STL or 3MF file and we’ll reply with the exact price and ready date, usually the same day.
S$10
Smallest order
2–4 days
For most orders
±0.2 mm
Typical accuracy
25.6 cm
Biggest single part, each side
What it costs
Your price is the filament used, the hours on the printer and a S$4 setup fee. You’ll see the breakdown in your quote before you pay.
Setup
Checking your file, slicing, packing and handover
S$4 per order
PLA
Includes waste and a failed-print buffer
S$0.02 per gram
PETG
Tougher, handles heat and outdoor use better
S$0.025 per gram
Specialty filaments
TPU, ASA or PETG-CF, ordered in for your job
from S$0.05 per gram
Print time
Taken from the slicer estimate
S$1.75 per hour
Extra build plate
For batches that need more than one plate
S$1.20 per plate
Support removal
Removing supports and tidying the edges
S$1 per piece
Sanding and primer
Smooth, paint-ready surface
S$14.50 per piece
Multicolour
Up to four colours in one print
+15% on material
3D design
If you only have a sketch, photo or broken part
S$40 per hour
Rush order
Your job goes to the front of the queue
+30%
Minimum order
S$10
Rough price in 10 seconds
Pick the material, size and quantity. When it looks right, send it to us with your file.
Print your name
Type any name and watch it come off the printer. Like it? Order it as a keychain in one tap.
How ordering works
1
Send your file
Send us an STL, 3MF or STEP file on Telegram or through the form below with the quantity and colour you want. No file? A photo with measurements works, and we can design it for you.
2
Get your price
We load it into the slicer and reply with the price, material and ready date. Most quotes go out the same day.
3
Pay and collect
Pay in full by PayNow before we print. Collect for free, or we book Lalamove or Grab at cost.
PLA or PETG?
Not sure which you need? Tell us what the part is for and we’ll pick for you.
PETG
S$0.025 / g
Good for
Functional parts, brackets, clips and things used outdoors. Tougher and slightly flexible.
Not ideal for
Ultra-fine cosmetic detail. The surface can be a little glossy and stringy.
Specialty
from S$0.05 / g
Good for
TPU for flexible grips and cases, ASA for outdoor parts, PETG-CF for stiff engineering parts.
Not ideal for
Rush jobs. We order these filaments in for your project.
A one-printer workshop
PrintLarh runs from home with one Bambu Lab P1S and an AMS 2 Pro, so you deal directly with the person printing your part. We keep PLA and PETG in stock and order other filaments in when a job needs them.
Things people get printed
- Prototypes
- Small batches
- Figurines & tabletop
- Gifts & keychains
- School & FYP projects
- Home & décor
Questions
Something not covered here? Ask us on Telegram or use the form below.
What file do I need to send?
An STL, 3MF or STEP file. No file yet? Send a photo, sketch or measurements and we can design it for you (S$40 per hour).
How fast will I get my print?
Most orders are ready in 2–4 working days. Rush jobs can be ready the next day for 30% extra.
How do I pay?
PayNow, in full before we start printing. After you accept your quotation, the bot sends a PayNow QR with the exact amount. Once the payment comes in, you get a receipt and we start your print.
How do I get my order?
Self-collection is free. We’ll send you the address when your order is ready. We can also send it by Lalamove or Grab, charged at cost.
How big can you print?
Up to 256 × 256 × 256 mm in one piece. Larger models can be split into parts and joined.
Will I see layer lines?
Yes, fine layer lines are normal for this kind of printing. If you want a smooth finish, add sanding & primer.
When do you reply?
Every day from 9am to 10pm. You can send your file any time and we’ll reply within those hours.
Is there anything you won’t print?
Weapons or weapon parts, and copyrighted characters or logos meant for resale.
Order on Telegram
Our Telegram bot checks your file and sends the exact price in about a minute. No file? Tell it what you need and add a photo.
Open @PrintLarhBot- 1Send your STL or 3MF file to the bot
- 2Get the exact price as a PDF, usually within a minute
- 3Pay by PayNow, we print, you collect
We reply every day, 9am to 10pm. Self-collect in Singapore. Payment by PayNow.